Our high quality eSATA…
SpaceFibre is the ESA standard for very high-speed serial communication links between the units of the satellite. It is compatible with SpaceWire at packet level, but the data-link and physical layers are completely re-defined in order to allow Link rate in the order of magnitude of 1 Gb/s to tens of Gb/s, i.e., 10x to 100x higher data-rate with respect to SpaceWire, Quality-of-Service (QoS) and enhanced Fault Detection, Isolation and Recovery (FDIR). Integrated Quality-of-Service allows to have different types of traffic over the same SpaceFibre network and to satisfy the overall requirements of bandwidth and latency of each traffic source. For example, control and data can be running on the same SpaceFibre networks by allocating the correct Quality-of-Service for each traffic source.
IngeniArs has long experience on SpaceFibre technology also thanks to the participation of its collaborators within the ECSS standardization working group. IngeniArs SpaceFibre technology was developed mainly thanks to Horizon 2020 SME instrument project SIMPLE, which allowed to develop both the SpaceFibre IP Core ready for flight usage and the relevant test equipment to support the validation phases.
IngeniArs has long experience on SpaceFibre technology also thanks to the participation of its collaborators within the ECSS standardization working group. IngeniArs SpaceFibre technology was developed mainly thanks to Horizon 2020 SME instrument project SIMPLE, which allowed to develop both the SpaceFibre IP Core ready for flight usage and the relevant test equipment to support the validation phases.
Download the SpaceFibre Datasheet here
The High-Speed Serial Link (HSSL) FMC provides 4 eSATA ports that are used to implement 4 bi-directional High-Speed Serial…
SpaceART® – SpaceWire/SpaceFibre/WizardLink Analyser Real-Time – is the complete testing solution for high speed links in space applications, supporting…
Science and Earth Observation missions are experiencing a constant technology evolution, with their payload instruments needing higher and higher…
The SpaceFibre Router IP Core offers a configurable and flexible solution for very high data-rate routing switch functionality for…
SpaceFibre CODEC IP core allows the implementation of point-to-point high-speed connection between two units, in full compliance with SpaceFibre standard…
“NDCP (Network Discovery And Configuration Protocol For SpaceFibre)” is an European Space Agency project for the interoperability, discovery and configuration…
European space missions both for Earth observation and science (e.g. Euclid, Metop-SG) are more and more demanding very…
Next week our space crew will be at Space Tech Expo USA, taking place on May 2-4 2023 at Long…
You will find us at ESA SESP 2023 next week in ESTEC, The Netherlands. See you there!…
Between the 14th and 16th of March we will be at the 5th edition of SEFUW, the SpacE FPGA Users…
IngeniArs will be golden sponsor of the 4th Italian Space Startup Competition, taking place from 12…
We are approaching to the Space Tech Expo Europe, the fifth edition of Europe’s largest B2B event for the space…
Only a few days left to the International SpaceWire and SpaceFibre Conference – ISC 2022! Though the pandemic situation has…
We are very proud to announce that IngeniArs profile page is now available on SATSEARCH website! Take a moment to visit…
We are very thankful to ITA – Italian Trade Agency and ITA – Italian Trade Agency – Sydney for giving visibility to Italian aerospace…
IngeniArs at the Industry Space Days 2022 (28-29 Sept. 2022) organised and hosted by the ESA at ESTEC facilities, to showcase…
IngeniArs is going to join this year the International Astronautical Congress – IAC 2022, from 18 to…
IngeniArs participated to the 37th Space Symposium edition, on April 4 – 7, 2022 in Colorado…
Take a moment to watch our new corporate video available on our YouTube channel:…
IngeniArs S.r.l. today at Agenzia Spaziale Italiana in Rome for taking part in the bilateral cooperation between Italian and Norwegian…
We are very proud to announce that we are Xilinx Certified Partner now! We would like to thank Xilinx for…
Also for this edition 2021-2022, IngeniArs company profile is available on the Italian Space Industry Catalogue…
The new University of Pisa Spin-off website is now available online: spinoff.unipi.it IngeniArs profile is…
As Microchip Technology Inc. Design Partner, IngeniArs S.r.l. profile page is now available on Microchip website! Click here to…
We are so excited to announce that IngeniArs new website is finally online! Discover more about our technologies,…
It has been decided to postpone the SpaceWire and SpaceFibre Conference 2020 (ISC 2020) to 2022 (dates to be announced),…
IngeniArs has been awarded first prize at Innovation Award 2019 held by the Chamber of Commerce in Pisa, because of…
After 5 years of Professor Luca Fanucci’s great leadership, Giuseppe Gentile becomes the new CEO of the company. We are happy to…
CORDIS (Community Research and Development Information Service) has recently published an article about IngeniArs project named SIMPLE (SpaceFibre IMPLementation, design…
IngeniArs has been awarded third prize at the “Primavera d’Impresa” competition with the project SIMPLE, which has been selected for…
On 16th July 2018 IngeniArs opened the new company headquarters. The new offices count on more than 100 square meters…